When there are problems with a building’s electrical system, the signs are usually fairly obvious. From burning odors and smoke to flickering lights and electric shocks, it’s easy to tell when there’s an issue with an Industrial Electrical Installation in Tucson AZ. Read on to learn about some of the signs of electrical failure.
Sparks and Burning Odors
If flipping a light switch or using an appliance fills a room with the smell of burnt plastic, or if sparks fly when something is plugged in, there’s a major issue at hand. When this happens, users should immediately shut down the affected circuit and call an electrician for diagnosis and repair.
Non-Working Outlets
A switch or outlet that doesn’t work can be caused by something as minor as a tripped breaker or disconnected circuit. While complex issues should be assessed by a professional, a non-functional switch or outlet is one that doesn’t work as it should. If the socket is so loose that a plug won’t stay in place, it should be replaced as soon as possible.
Electrical Shock
Regardless of the source, if anything in the building gives off a shock when it’s touched, it should be replaced or repaired right away. During electrical work, the affected circuit must be shut down anyway, and building owners can get a head start by tripping the appropriate breaker.
Breaker Problems
Electrical breakers trip when problems are detected in a circuit. When there’s an excessive load on the breaker, a trip may occur. While assigning high loads to different circuits can sometimes resolve these problems, there may be an issue with the circuit or breaker itself. Occasionally, a breaker won’t trip when it should. In these cases, users should listen for a buzzing noise or look for excessive heat from the wires or box.
Lights are Flickering
When lights flicker, it can indicate a problem with an Industrial Electrical Installation in Tucson AZ. Users can check the fixtures to ensure there’s no issue with the connection points. However, if the issue can’t be found there, it may be in an inaccessible area, and the user should call an electrician.
Commercial electrical problems can put workers and customers at risk, but the pros are here to help.
