When someone has a sink that has water clogging the drainage area, it is likely they will want to take the necessary steps in alleviating the problem so they can use the basin area as they normally do. There are a few steps that can be taken to calling a Plumbing Specialist in Bowie MD in an attempt to get water to drain as it should. Try these tips to see if water can be directed downward instead of sitting in a sink basin.
Use A Plunger To Get Solids Out Of The Way
It is a good idea to attempt plunging a sink to see if any material stuck in the pipes will dislodge. The plunger can be used in the same manner as it is used when remedying a stopped up toilet. Try the plunging movement several times to move food particles and others solids from the pipes, perhaps allowing water to make its way out of the sink basin in the process.
Take Off The P-Trap To See If It Is Clogged
The p-trap pipe is the bent pipe located underneath a sink, leading from the drain area. This pipe may have bits of food or hardened grease trapped inside, making it difficult for water to get through the pipe because of the obstruction. The pipe can be removed with a wrench and cleaned out to loosen any material that became lodged inside. Before the pipe is removed, a bucket needs to be placed under it so water will not damage the floor under the sink during the process.
Try Using A Plumber’s Snake To Push Through Material
A plumber’s snake can be used to loosen lodged material further down the piping system. Insert the end of the wire portion into the pipe and unwind the tool so it snakes its way through the pipe for several feet. The end may snag material, bringing it through the pipe and out of the way as the wire is wound back onto the tool’s handle.
If there is a need to hire a Plumbing Specialist in Bowie MD, finding one that will respond right away is usually desired. Browse our website to find out more today.
