Putting in a new asphalt platform can enhance the usability of a space. Pouring the asphalt is actually one of the last steps in the process. There are several other steps that have to be taken before the trucks roll in. Some of these items will have to be done ahead of time to ensure there are no delays on the project.
One of the first steps in Asphalt Paving in Fairburn, GA is marking out the area where the asphalt is going to go. This area can be marked with paint or defined with ropes. Once the area is defined visually, the plans can be modified if the area isn’t quite adequate or there are unexpected obstacles. If changes do need to be made, some recalculations will have to be done to accommodate the new shape.
After the area is marked, the ground will have to be leveled and graded. Since there is often digging required, there are some things to check before the digging commences. If you have underground plumbing piping for sprinkler systems or cable wiring, you will have to relocate these objects to keep them accessible and to prevent damage from occurring. Any tree stumps or large rocks will also have to be moved. In addition, check with the power company to ensure no wires are located in the area.
Once the area is leveled, the form is built for the Asphalt Paving in Fairburn, GA. The form is the support system that helps to prevent the asphalt from spilling out into areas where it doesn’t belong. Typically, the form is built of wood shaped to fit the space. The form also helps to hold the base material of crushed rock in place to provide a strong foundation for the asphalt.
Preparation for the pour is a big part of the process for a new asphalt surface. It may take some time to do the preparation, especially if you have to relocate sprinkler piping or have to deal with buried power lines. Once the preparation work is done, it won’t take long before the new asphalt can be used.
