Roller Mills in Oregon are extremely handy pieces of equipment to own. They are solidly built and are known for their milling power. For first-time roller mill owners, here are a few tips and suggestions to follow when the roller mill arrives on the doorstep.
- Even the smallest of roller mills is still an incredibly heavy piece of machinery. Before the roller mill arrives, it is highly advisable to determine exactly where the mill will be set-up. It should be bolted or otherwise fastened to a sturdy table or a countertop. There are also specialty roller mill stands that are available for purchase. Whatever is decided upon needs to be able to support the weight of the mill and absolutely needs to be properly secured to the floor. Failure to do so may result in serious injury or even death. It is also necessary to achieve the leverage required to operate the roller mill.
- When taking the roller mill out of the crate or box, it will be very evident that it is completely covered in grease. This is a typical way of shipping any kind of steel tool. After the roller mill is completely removed from its shipping container, wipe it down with a lint-free cloth and a “white” solvent. This will enable the grease to be easily removed. Pay close attention to the rollers to ensure that absolutely no grease remains present on them.
- To keep the roller mills in Oregon working effectively, it will be necessary to keep the rollers lubricated on a regular basis. This can be done by using an oil that is resistant to corrosion or some other form of rust prevention lubricant. The gears actually lubricate themselves so no service will be required on them. Always check the owners manual to see if additional maintenance steps are required.
Click here for more helpful tips and how-tos in regards to high-quality roller mills. These types of equipment can last decades when properly cared for, so it is in the best interest of the owner to ensure that all steps are followed per manufacturer instructions.
