It can be frustrating when you are coming home from work or trying to get out of the garage to go work and the garage door will not open. There are several things that may cause the garage door to not open or close correctly, but the most common problem is the Garage Door Opener in St. Louis, MO. Before calling a garage door technician, there are several things you can try that may solve the problem.
One of the most common problems with a non-functioning Garage Door Opener in St. Louis, MO is weak or dead batteries. It is best to use name brand batteries in the garage door remote, because they tend to last longer than less expensive batteries and they typically do not put out the same volts as a name brand battery. For example, a cheap battery may only put on 1.2 volts, whereas a name brand brand will put out 1.5 volts. Rechargeable batteries are also a great investment, but remember to have a backup battery to use when recharging.
The receiving unit that is located inside the garage and the remote control have eyes that are used to transmit the signal. If the eyes on either the remote control or receiving unit have dust or debris on it, the signal will not be transmitted, so routinely wipe them off with a clean, damp cloth. Also check for possible scratches on the eye that may be interfering with the transmission.
If there is a scratch on either device, it may need to be replaced .It is common for other signals to get crossed with your devices, such as from a neighbor with a similar device, so in some cases the remote control and/or the receiver may need to be reset. To reset the remote control, remove the batteries for at least 30 seconds and put them back in. To reset the receiver, unplug it for about 30 seconds and plug back in. If this doesn’t work, try changing the code. To change the code, press the designated button on the keypad and choose a new code. If you are having problems resetting the code, contact the manufacturer or a local garage door contractor for instructions. Visit.
