A mold inspection in Oklahoma City OK can either be accomplished by the homeowner or through a professional mold inspection and removal company.
If you plan on doing the inspection yourself the place to start is with a visual inspection, look for any evidence of mold or moisture around the windows, sinks and water lines in your home, pay particular attention to the bathroom and kitchen where water frequently is in use. A moisture pin meter is not expensive and readily available at any home improvement store. Mold has a unique odor; this is also something that may be a giveaway to a problem if it should come from the vents or ducts. If mold is growing in the ducting this can pose a real problem as the mold spores will be sent all through the home.
In many states it is mandatory for a property seller to have his home inspected for mold before it is put on the market.
There is no doubt that a DIY mold inspection in Oklahoma City OK area is less than perfect, a professional inspection is not expensive and the inspection is many time more thorough than you could ever do yourself. Professional mold inspectors have sophisticated thermal imagers that can detect traces of water that you may never see. A complete professional inspection will include a leak detection test and moisture analysis as well as air quality analysis, testing the relative humidity in the home and an evaluation of your drainage.
Every home has mold, it really is everywhere and a little is not a major concern. You will find mold in the bathroom but as it is on hard surfaces it is easy to clean off with a little bleach and water. If the problem is a little bigger you may have to use a fungicide which has been approved for use by the EPA. Cleaning is one thing, stopping the mold from coming back is equally important; the water source must be found and eliminated. As long as there is water from a leaking pipe, a leaky roof or a problem with a drain mold will continue to be a problem.
The whole idea of mold inspection in Oklahoma City OK is to find the source of water so that the mold problem can be attacked and permanently rectified. Mold is not something to take lightly; it can lead to serious respiratory problems and actually compromise the structural integrity of a building. Visit the website for more information.
