Septic tanks are large cement containers or steel tanks buried in the soil near many homes. The main purpose of these containers is to collect all the discharges from the household pipe network. These unwanted solid and liquid wastes come from bathrooms, lavatories, kitchen as well as washing stations. Septic tanks come in various sizes. The installation of a specific size depends on various factors, which include the size of the family and the level of water usage.
How the septic tank works
In general, a septic tank consists of a tank or tanks of between 1000 and 2000 gallons in size joined to an inlet waste-water pipe at one end and an absorption field at the other. Modern design of septic tanks normally incorporates two chambers separated by a dividing wall. This dividing wall has openings located about midway between the floor and the roof of the septic tank. The waste-water from the household pipe network flows into the first chamber of the tank, allowing the sludge to settle and scum to float. The bacteria present anaerobically digest the sludge to reduce the volume of the solid waste. The effluent flows through the openings on the dividing wall to the next chamber where further settlement takes place. The partially treated effluent then leaves the second chamber via a perforated piping network to the drain field, leaving solid waste behind in the chambers.
Why you need Septic Tank Cleaning Apopka, FL Area
The solid waste left in the holding chambers can build up causing the plumbing lines leading to the septic tank become clogged. This can lead to a complete septic system failure, which can be a threat to the health of both your family and neighbors. Septic tank repairs can be expensive. Therefore, it is important to regularly maintain your tank. It also needs to be checked regularly for cracks, leaks and blockages.
How septic cleaning is done
Normally, a septic pumping truck with vacuum power is needed to pump out the tank. The waste is suctioned from the chambers of the tank using a vacuum line. Before the line is connected to the truck, the sludge is broken up and then the motor is turned on to start vacuuming.